ETUVE (LABORATORY OVEN) & WATER BATH
(Rt+5 °C /+99 °C)
ESB 10
EMSAS
• The device is used to ensure that the chemicals used in laboratories are heated without fire.
• The device ensures that chemical solutions and samples are kept constant at desired temperatures at desired times.
• The device performs melting process with the watery system. Water is constantly circulated in the device. Therefore, homogeneous heat distribution is provided in the device.
• Glass wool is used on the upper part of the device as insulation material.
• Since there is no heater or pump in the chamber, there is no loss in net volume.
• The device provides precise temperature measurement thanks to its microprocessor control.
• Additional safety measures have been taken against overheating with the safety thermostat adjustable between 30 and 90 degrees in the device.
• There is a drainage system for the discharge of excess water in the device.
• The inner chamber is made of monoblock stainless steel with rounded corners to reduce the risk of contamination of the device.
• The outer surface is stainless steel made of electrostatic painted galvanized sheet.
• The device provides the user the opportunity of programming between 0 and 99.99 hours.
• The device provides wide usage opportunity with its delayed start and indefinite working mode.
• Emsaş A.Ş. All medical devices manufactured by us are guaranteed for 2 years.